Lanthanide-organic-frameworks modified ZnIn2S4 for boosting hydrogen generation under UV–Vis and visible light

Novel Ln-MOF with microrods shape were successfully combined with ZnIn₂S₄ (ZIS) microsphere and used for photocatalytic hydrogen generation under UV–Vis and visible light. The Ln-MOFs/ZIS system comprises lanthanide-carboxylate coordination networks (Tm and Gd as metal ions, and 1,3,5-benzenetricarboxylic acid (BTC) as the organic linker) deposited on ZnIn₂S₄ microspheres. Effect of the amount of ((Tm,Gd)-BTC) (1, 5, 10 wt%) on the optical properties and photocatalytic hydrogen evolution performance was investigated. ZIS microsphere shows the marigold flower-like morphology and hexagonal polytopic crystal form. Our results proved that the combination of ZIS microsphere, Ln-MOF and Pt nanoparticles (NPs) caused significant enhancement in hydrogen generation. Amount of formed hydrogen was raised from 196.3 to 7782.1 μmol g^?1 for pristine ZIS and ZIS decorated with 1% (Tm, Gd)-BTC/Pt under UV–Vis light, respectively.     

Remarkably enhanced energy storage properties of lead-free Ba0.53Sr0.47TiO3 thin films capacitors by optimizing bottom electrode thickness

The lead-free Ba_0.53Sr_0.47TiO₃ (BST) thin films buffered with La_0.67Sr_0.33MnO₃ (LSMO) bottom electrode of different thicknesses were fabricated by pulsed laser deposition method on a (001) SrTiO₃ substrate. It was found that the roughness of electrode decreases and substrate stress relaxes gradually with the increase of LSMO thickness, which is beneficial for weakening local high electric field and achieving higher E_b. Therefore, the recoverable energy density (W_rec) of BST films can be greatly improved up to 67.3 %, that is, from 30.6 J/cm³ for the LSMO thickness of 30 nm up to 51.2 J/cm³ for the LSMO thickness of 140 nm after optimizing the LSMO thickness. Furthermore, the thin film capacitor with a 140 nm LSMO bottom electrode shows an outstanding thermal stability from 20 °C to 160 °C and superior fatigue resistance after 10⁸ electrical cycles with only a slightly decrease of W_rec below 1.6 % and 3.7 %, respectively. Our work demonstrates that optimizing bottom electrodes thickness is a promising way for enhancing energy storage properties of thin-film capacitors.     

Nonlinear response in glass fibre non-crimp fabric reinforced vinylester composites

This paper addresses the nonlinear stress-strain response in glass fibre non-crimp fabric reinforced vinylester composite laminates subjected to in-plane tensile loading. The nonlinearity is shown to be a combination of brittle and plastic failure. It is argued that the shift from plastic to brittle behaviour in the vinylester is caused by the state of stress triaxiality caused by the interaction between fibre and vinylester. A model combining damage and plasticity is calibrated and evaluated using data from extensive experimental testing. The onset of damage is predicted using the Puck failure criterion, and the evolution of damage is calibrated from the observed softening in plies loaded in transverse tension. Shear loading beyond linear elastic response is observed to result in irreversible strains. A yield criterion is implemented for shear deformation. A strain hardening law is fitted to the stress-strain response observed in shear loaded plies. Experimental results from a selection of laminates with different layups are used to verify the numerical models. A complete set of model parameters for predicting elastic behaviour, strength and post failure softening is presented for glass fibre non-crimped fabric reinforced vinylester. The predicted behaviour from using these model parameters are shown to be in good agreement with experimental results.     

Comparative study on the curing kinetics and mechanism of a lignin-based-epoxy/anhydride resin system

Curing kinetics and mechanism of liquid lignin based epoxy resin (LEPL)–maleic anhydride (MA) system accelerated with benzyldimethylamine (BDMA) were studied by Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). In order to investigate the difference in the curing process, heating FTIR was used to study the change of the functional group. Complete consumption of the epoxides has been observed after the heating temperature was higher than 110 °C. E constant method and E variable method, to study the dynamic DSC curves, were deduced by assuming a constant and a variable activation energy, respectively. With E constant method, the cure reaction activation energy E, the frequency factor A and overall order of reaction n + m are calculated to be 59.68 kJ mol⁻¹, e^20.6 and 1.462, respectively. With E variable method, E is proved to decrease initially, and then increases as the cure reaction proceeds. The value of E spans from 60.16 to 87.80 kJ mol⁻¹. With the E constant method, E variable method and heating FTIR spectra used together, we can have a comprehensive and profound understanding of the cure reactions of the LEPL–MA system.     

Stochastic Resonance in Recurrent Neural Network with Hopfield-Type Memory

Stochastic resonance (SR) is known as a phenomenon in which the presence of noise helps a nonlinear system in amplifying a weak (under barrier) signal. In this paper, we investigate how SR behavior can be observed in practical autoassociative neural networks with the Hopfield-type memory under the stochastic dynamics. We focus on SR responses in two systems which consist of three and 156 neurons. These cases are considered as effective double-well and multi-well models. It is demonstrated that the neural network can enhance weak subthreshold signals composed of the stored pattern trains and have higher coherence abilities between stimulus and response.     

Interface evolution in the platelet-like SiC@C and SiC@SiO<Subscript>2</Subscript> monocrystal nanocapsules

Carbon-coated SiC@C nanocapsules (NCs) with a hexagonal platelet-like morphology were fabricated by a simple direct current (DC) arc-discharge plasma method.The SiC@C NCs were monocrystalline,120-150 nm in size,and approximately 50 nm thick.The formation of the as-prepared SiC@C NCs included nucleation of truncated octahedral SiC seeds and subsequent anisotropic growth of the seeds into hexagonal nanoplatelets in a carbon-rich atmosphere.The disordered carbon layers on the SiC@C NCs were converted into SiO2 shells of SiC@SiO2 NCs by heat treatment at 650 ℃ in air,during which the shape and inherent characteristics of the crystalline SiC core were obtained.The interface evolution from carbon to SiO2 shells endowed the SiC@SiO2 NCs with enhanced photocatalytic activity due to the hydrophilic and transparent nature of the SiO2 shell,as well as to the photosensitive SiC nanocrystals.The band gap of the nanostructured SiC core was determined to be 2.70 eV.The SiC@SiO2 NCs degraded approximately 95％ of methylene blue in 160 min under visible light irradiation.     

RP—HPLC流动相组成优化方法的研究及其专家系统的建造

本文提出了一种既便于自动求值,又不致产生歧义的色谱分离优化目标函数。对于反相高效液相色谱RP-HPLC流动相组成优化问题,提出了新的高效迭代方法,并建立了组成优化专家系统。该系统包括优化搜索区域确定、实验谱图辨识、保留特性关系的自适应回归和最优目标预测等功能。经实验验证,该系统具有较高的迭代搜索效率。     

The swelling behavior and wet morphology of water-absorbable polymer materials

In this research work, a low-temperature examination method for scanning electron microscopy (SEM) is introduced. A water-absorbable polymer material, the sulfonated polyethylene (SPE) ion-exchange hollow fiber membrane, was used for the experiments. With this low-temperature technique, the wet morphology of the water-absorbable sulfonated polyethylene hollow fiber membrane was revealed. The results obtained from this investigation offer some important information to explain the behavior of the SPE hollow fiber membranes when they are applied in pervaporation separation of water/organic solvent mixtures, such as water/ethylene glycol, water/ethanol, and so forth.     

Effect of rolling deformation on the structures and properties of multi‐walled carbon nanotube filled isotactic polypropylene

Isotactic polypropylene filled with various contents of multi‐walled carbon nanotubes (MWCNTs) were fabricated by the injection molding technique and then rolled at room temperature. The unrolled samples (URS) and rolled samples (RS) were characterized by X‐ray diffraction studies, scanning electron microscopy, mechanical and micromechanical tests and differential thermal analyses. Although the URS exhibit the lamellar α‐crystal with a*‐axis orientation, the RS show the same crystals with both a*‐ and c‐axis orientation, which is explained by interlamellar and intralamellar slips and lamellar destruction. Scanning electron micrographs display distinct surface morphological features for both URS and RS. While the tensile strength of RS is higher than that of URS, the Young's modulus (Y) is found to be lower than that of URS. Anisotropy in microharness (H) parallel and perpendicular to the rolled direction has been detected, although H for both samples increases with increasing MWCNT contents. The average relationship H/Y ≈ 0.18 as estimated for URS is closer to the predicted value of 0.10 for polymers than the H/Y ≈ 0.22 obtained for RS. The lamellar thickness for URS increases with increase of MWCNT content and that for RS decreases, as evaluated from both differential thermal analyses and X‐ray diffraction data. Copyright © 2011 Society of Chemical Industry